Clevo P670RG Series - Page 44

Disassembly
2 - 20 Removing the M.2 SATA Module
2.Disassembly
M.2 SATA-2 Removal Procedure
1. Turn off the computer, remove the battery (page 2 - 6).
2. Locate the module, it is visible at point
(Figure 15a).
3. Remove the screw from the module
(Figure 15b).
4. The module will pop-up
(Figure 15c).
5. Lift the module up and off the computer
(Figure 15d).
6. Reverse the process to install a new module.
Figure 15
M.2 SATA-2 Module
Removal
a. Locate the module.
b. Disconnect the cables and
remove the screw.
c. The module will pop-up.
d. Lift the module up off the
socket.
1
2
3
3
a.
c.
1
b.
d.
2
3
3

3. M2 SATA Module
•1 Screw