Clevo P950HR - Page 31

Disassembly
Removing the Battery 2 - 7
2.Disassembly
5. The battery will be visible at point on the computer (Figure 3d).
6. Carefully disconnect the cable , then remove screws
- (Figure 3e).
7. Lift the battery off the computer (Figure 3f
).
8. Reverse the process to install a new battery (do not forget to replace all the screws and bottom cover).
18
19
20
21
22
Figure 3
Battery Removal
(cont’d.)
d. Locate the battery.
e. Disconnect the cable and
remove the screws.
f. Lift the battery off the
computer.
e.
f.
22
19
20
21
22
d.
18

23. Battery
•2 Screws