Clevo P950HR - M.2 SSD Installation Procedure

Disassembly
2 - 12 Removing the M.2 SSD Module
2.Disassembly
M.2 SSD Installation Procedure
1. Place the thermal pad on the mainboard as shown (Figure 8a).
2. Insert the module in the computer
(Figure 8b).
3. Tighten the screw to secure it in place (Figure 8c).
1
2
3
a.
b.
c.
1

Thermal Pad
Be sure to place the thermal pad’s adhesive side down onto
the mainboard surface as shown.
3
2

1. Thermal Pad
2. M2 SSD Module
•1 Screw
Figure 8
M.2 SSD Module
Installation
a. Place the thermal pad.
b. Insert the module.
c. Tighten the screw.