Clevo W170ER - Removing the Keyboard

Disassembly
2 - 16 Removing the Keyboard
2.Disassembly
Removing the Keyboard
1. Turn off the computer and remove the battery (page 2 - 5).
2. Remove screws
- from the bottom of the computer and use the Eject Pin Tool to carefully push out the key-
board at point
3. Remove the top cover module and the screws - (Figure 12b).
4. Carefully lift the keyboard
up, being careful not to bend the keyboard ribbon cable (Figure 12c).
5. Disconnect the keyboard ribbon cable from the locking collar socket .
6. Carefully lift up the keyboard (Figure 12d) off the computer.
1
2
3
4
5
9
10
11
12
10
a.
b.
1 2
3
8
6
c.
5
7
d.
10
11
12
10
9
4
Figure 12
Keyboard Removal
a. Remove screws from the
bottom of the computer
and use the Eject Pin Tool
to push out the keyboard at
point .
b. Remove the top cover
module and the screws.
c. Lift the keyboard up and
disconnect the cable from
the locking collar.
d. Remove the keyboard.
3

4. Top cover module
10. Keyboard
•7 Screws