Clevo W230SD - Removing the Msata Module

Disassembly
2 - 20 Removing the mSATA Module
2.Disassembly
Removing the mSATA Module
1. Turn off the computer, turn it over and remove the battery (page 2 - 5), and component bay cover (page 2 - 7).
2. The mSATA module will be visible at point on the mainboard (Figure 15a).
3. Carefully remove the screw
(Figure 15b).
4. The mSATA module (Figure 15c) will pop-up, and you can remove it from the computer (Figure 15d).
1
2
3
1
a.
b.
4
2
4
c.
d.
Figure 15
mSATA Module
Removal
a. Locate the mSATA
module.
b. Remove the screw.
c. The module will pop-
up.
d. Remove the mSATA
module.

4. mSATA Module
•1 Screw