How to turn on Bluetooth on Clevo W251EFQ Laptop after sleep mode?
- BBrittney BurnsAug 3, 2025
If the Bluetooth module is off after resuming from Sleep mode, use the key combination (Fn + F12) to power on the Bluetooth module.
How to turn on Bluetooth on Clevo W251EFQ Laptop after sleep mode?
If the Bluetooth module is off after resuming from Sleep mode, use the key combination (Fn + F12) to power on the Bluetooth module.
Follow basic safety precautions to reduce risk of fire, electric shock, and injury.
Suggestions to prevent damage: avoid shock, keep dry, and do not overheat.
Computer specific power requirements and safety warnings for power adapters and cords.
Information specific to polymer batteries, including expansion and handling procedures.
Guidelines for safe handling, use, and disposal of batteries to prevent hazards.
Refer all servicing to authorized personnel; unplug before servicing.
Explanation of drivers as interfaces between computer and hardware components.
Step-by-step instructions for initial computer startup.
Accessing and using the Control Center for module management and power modes.
Instructions for installing the USIM card into the 3G module.
Description of the hard disk drive and its location for access.
Description of the optical drive and how to load discs.
Description of the card reader and supported digital storage card formats.
Description of the TouchPad as a mouse alternative and its functions.
Configuring audio options via Sound control panel, HD VDeck, or VIA HD Audio Deck.
Explanation of computer power sources: AC/DC adapter and battery pack.
Instructions on how to turn on the computer using the power button.
Configuring power conservation using power plans and adjusting settings.
Using Sleep, Hibernate, and Shut Down states to stop and restart operations.
Explanation of Hibernate mode: saving work to hard disk, lowest power consumption.
Instructions on when to shut down the computer, e.g., for hardware installation.
Setting power/sleep button and closed lid to enter power-saving states.
Adjusting power conservation modes (Performance, Balanced, Energy Star) via Control Center.
Guidelines to get the best use out of the computer's battery.
Tips for conserving battery power: power plans, brightness, device disconnection.
How the battery recharges automatically when the AC/DC adapter is connected.
Safety warnings for handling battery packs: no disassembly, avoid fire and terminals.
Information on necessary drivers and utilities from the distribution disc.
Procedures for installing drivers for PC Camera, Wireless LAN, 3G, and Bluetooth modules.
Instructions for installing drivers using the Drivers Installer application.
Steps for manual driver installation via the Drivers Installer or executable files.
Procedure to uninstall and then update or reinstall individual device drivers.
Step-by-step guide for installing chipset, video, and NVIDIA drivers.
Steps to install the chipset driver.
Steps to install the audio driver, including license agreement.
How to enter Setup, conduct POST, and use Aptio Setup Utility.
Overview of the BIOS Main Menu screen.
Access to advanced BIOS settings and configurations.
Adjusting the Bluetooth module power setting.
Enabling/disabling Intel Smart Connect Technology for updates in Sleep mode.
Information on Intel Anti-Theft Technology for computer security.
Configuring SATA control to operate in IDE or AHCI modes.
Accessing and configuring security settings like passwords.
Setting a password for user mode access to the Aptio Setup Utility.
Specifying whether a password is required to boot the computer.
Preventing unauthorized OS and software loading during startup.
Configuring the order in which the computer looks for an operating system.
Recommendation to contact service representative for processor upgrades.
Step-by-step instructions for safely removing the computer's battery.
Instructions for upgrading the hard disk drive with a new one.
Procedure for removing the optical device, dependent on computer model.
Instructions for upgrading the system memory (RAM) modules.
Steps to install the PC Camera driver using the distribution disc.
Information on the Wireless LAN module, including driver installation.
Installation steps for 3rd party WLAN & Bluetooth combo modules.
Installation steps for Intel WLAN driver.
Information on optional 3G modules for Models A & C.
Instructions for installing the USIM card into the 3G module.
Step-by-step guide for installing the Wireless Manager application.
Instructions for creating a new profile with necessary details.
Step-by-step guide for installing the AirCard Watcher application.
Sending and receiving SMS text messages using AirCard Watcher.
Instructions for composing and sending text messages.
Step-by-step guide for installing the Mobile Partner application.
Information on installing drivers for Wireless LAN & Bluetooth combo modules.
Installation steps for 3rd party Bluetooth combo drivers.
Installation steps for Intel Bluetooth combo drivers.
Steps to add a Bluetooth device and pair it with the computer.
Installing Intel Rapid Storage Technology for SATA drive support.
Steps to install the Intel Rapid Storage Technology driver.
Steps to install the THX TruStudio AP application.
Steps to install the Intel Smart Connect Technology driver.
Steps to install the Intel WiDi application.
Steps to install the Intel Wireless Music Driver for wireless audio streaming.
Precautions and steps for upgrading hardware and installing software.
Common problems and their potential causes and solutions.
Troubleshooting steps for connecting Bluetooth devices, including driver installation.
Troubleshooting the 'Insert a SIM' error in Windows 8 after power-saving state.
Setting Power Modes (Power Saving, Balanced, Performance) for modules and system.
Using Energy Star features for low-power sleep modes.
Entering Sleep or Hibernate power-saving modes.
Installing video drivers in the specified order from the distribution disc.
Steps to install the VGA driver.
Steps to install the NVIDIA VGA driver, including license agreement.
Accessing advanced video configuration options via Intel Graphics & Media Control Panel.
Accessing advanced video configuration options via NVIDIA Control Panel.
Setting preferred graphics processor for overall use (iGPU or dGPU).
Making specific adjustments for installed applications' graphics processor usage.
List of available Intel Core and Pentium processors with their specifications.
Power management features supported, including Wake on LAN.
Methods to access the Control Panel in Windows 8.
Accessing Power Options from Control Panel or Charms Bar Settings.
Instructions for installing drivers and utilities for the system.
Steps for installing drivers from the computer's DVD drive.
Accessing Network and Internet control panel for network connections.
Configuring 3G connection for Models A & C, with no driver installation needed.
Instructions for disabling the PIN code for a 3G module.