Modules & Options
7 - 80 Bluetooth & WLAN Combo Module
7
Intel Bluetooth Combo Driver Installation
1. Before installing the driver make sure the Bluetooth module is powered
on (use Fn + F12 key combination), then insert the Device Drivers & Utili-
ties + User’s Manual disc into the CD/DVD drive. If a Found New Hard-
ware window appears, click Cancel in all windows that appear, and then
proceed to install the driver as below.
2. Click Option Drivers (button).
3. Click 4.Install Combo BT Driver > Yes.
4. Click Next > Next.
5. Click the button to accept the license and click Next.
6. Click Next > Finish.
7. See over for configuration instructions.
Note that, at the time of going to press, Intel® Centrino® Wireless-N 2230 and In-
tel® Centrino Advanced 6235 & Bluetooth combo modules use the standard Blue-
tooth configuration in Windows 7 (see “Standard Bluetooth Configuration in
Windows 7” on page 7 - 81). See “Bluetooth Settings (Windows 8)” on page E -
37 for instructions on Bluetooth settings for Windows 8.
High Speed Bluetooth
Data Transfer
The
Combination Wire-
less LAN & Bluetooth
module
supports high
speed data transfer. How-
ever to achieve such
transfer speeds,
both de-
vices must support
high speed data trans-
fer
.
To obtain high speed
data transfer make sure
that both the WLAN and
Bluetooth modules are
powered on.
Check your Bluetooth
compatible device’s doc-
umentation to confirm it
supports high speed data
transfer.