Troubleshooting
Wake On LAN Setup 8 - 19
8
Resolving the “Insert a SIM” issue with the 3G Module (Windows 8)
1. If a PIN was set for the EM820W 3G module, you have then switched Mobile broadband off (or put the system
in Airplane Mode) under Wireless in PC Settings, and the system has just resumed from a power-saving state
the following error may occur.
Figure 8 - 7 - PC Settings (Charms Bar) - Wireless (Mobile Broadband Off)
2. On resuming from the power-saving state the standard procedure would be to go to PC Settings in the Charms
Bar and turn on Mobile broadband under Wireless > Wireless Devices.
To Next Page
Loading...
Need help?
General
