E - 42 3G Settings (Windows 8)
Windows 8
Windows 8
3G Settings (Windows 8)
(For Models A & C Only)
If you have included an optional UMTS/HSPDA OR UMTS/HSPDA+ based 3G Module (Universal Mobile
Telecommunications System
or High Speed Packet Access) module in your purchase option, you do not require
a driver/application installation for Windows 8. Follow the instructions on page 7 - 33 to install the USIM card
(which will be provided by your service provider), and then use the Charms Bar Wireless icon to access the
3G network in the same manner as the WLAN (see overleaf).
Important Notice - 3G & Bluetooth/Wireless LAN Modules
In order to comply with FCC regulations you should NOT operate the 3G module and the Bluetooth/Wireless LAN modules
at the same time as this may disrupt radio frequency, and cause interference. When the 3G module is powered on, make
sure that the Bluetooth/Wireless LAN modules are powered off.
Wireless Device Operation Aboard Aircraft
The use of any portable electronic transmission devices aboard aircraft is usually prohibited.
Make sure the module is either OFF or in Airplane Mode (for Windows 8 only) if you are using the computer aboard aircraft.