Clevo W25CEV - Removing the System Memory (RAM)

Disassembly
2 - 8 Removing the System Memory (RAM)
2.Disassembly
Removing the System Memory (RAM)
The computer has two memory sockets for 204 pin Small Outline Dual In-line Memory Modules (SO-DIMM) supporting
DDRIII (DDR3) Up to 1333 MHz. The main memory can be expanded up to 8GB. The SO-DIMM modules supported
are 1024MB and 2048MB DDRIII Modules. The total memory size is automatically detected by the POST routine once
you turn on your computer.
Memory Upgrade Process
1. Turn off the computer, turn it over to remove the battery (page 2 - 5).
2. Locate the component bay cover and remove screws - .
3. Carefully remove the component bay cover .
1
5
6
b.
4
2
6
a.
1
3
5

6. Component Bay Cov-
er
•5 Screws
Figure 4
RAM Module
Removal
a. Remove the screws.
b. Remove the cover.