Disassembly
2 - 16 Removing the Bluetooth Module
2.Disassembly
Removing the Bluetooth Module
1. Turn off the computer, remove the battery (page 2 - 5) and the component bay cover (page 2 - 9).
2. The Bluetooth will be visible at point on the mainboard.
3. Remove the screw and turn the module over.
4. Carefully separate the Bluetooth module from the connector
and disconnect the cable .
5. Lift the Bluetooth module
(Figure 12d) up and off the computer.
Figure 12
Bluetooth Module
Removal
a. Remove the cover and Io-
cate the Bluetooth.
b. Remove the screw.
c. Disconnect the cable and
the connector.
d. Lift the Bluetooth module
up off the socket.
1
2
3 4
5
a.
b.
2
1
5
c.
3
d.
4
5. Bluetooth Module
•1 Screw
To Next Page
Loading...
Need help?
General
