Clevo X7200 - Page 49

Disassembly
Removing the Hard Disk from the Secondary HDD Bay 2 - 25
2.Disassembly
7. Replace screws - (page 2 - 23).
8. Insert the HDD assembly into the bay by pushing it straight down (do not insert the assembly at an angle) and then
slide it in the direction of the arrow to lock in place (Figure 20e).
6
9
12
12
e.
Figure 20
Removing the
Hard Disk(s) from
the Secondary
HDD Bay (cont’d.)
e. Insert the HDD as-
sembly into the bay
by pushing it straight
down and then slide it
in the direction of the
arrow to lock in place.