Clinton FL-20A - Page 7

Declaration of Conformity
Manufacturer: ..............The Clinton Instrument Company
Address: ........................ 295 East Main Street
Clinton, CT USA 06413
Herewith declares that
The Cable Fault Locator
Type FL-20A
is in conformity with the provisions of the following EEC directives:
89/236/EEC
73/23/EED
Conforms with the emissions requirements of EN 61326-1:2006; Clause 7.2:
CISPR 11 Edition 4:2003 .....Conducted Emissions, Class A
CISPR 11 Edition 4:2003 .....Radiated Emissions, Class A
IEC 61000-3-2:2000 ..............Harmonics
IEC 61000-3-3:2002 ..............Flicker
Conforms with the immunity requirements of EN 61326:2006; Table 1:
IEC 61000-4-2:2001 ..............Electrostatic Discharge
IEC 61000-4-3:2002 ..............Radiated Immunity
IEC 61000-4-4:2004 ..............EFT/Burst, Power and I/O Leads
IEC 61000-4-5:2001 ..............Surge Immunity
IEC 61000-4-6:2003 ..............Conducted Immunity, Power and I/O Cables
IEC 61000-4-11:2004 ............ Voltage Dips and Interrupts
Conforms to the safety requirements of EN61010.
Clinton, CT USA February 2010
Marianne Szreders
President
Ted P. Lane
Chief Engineer