EasyManua.ls Logo

CLIVET MSAN-XMi 180T - 6.2 Indoor Unit System Wiring

CLIVET MSAN-XMi 180T
92 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 6-3
ιι
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
NO.
Contents
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
NO.
Contents
Discharge temp. sensed port of the inverter
compressor A
Discharge temp. sensed port of the inverter
compressor A or B
Ttemp. sensed port of the inverter module radiator
Reserved
Reserved
Wiring port for communication between indoor and out
-door units,indoor unit network and network accounting
Phase inspection port
Power input of the No.1 transformer
Power input of the No.2 transformer
Loading output terminal
EXV A driving port
EXV B driving port
Loading output terminal
Loading output terminal
Loading output terminal
Power output of the No.1 transformer
Power output of the No.2 transformer
Activation port of inverter module B
Port for inverter module B voltage inspection
Port for inverter module A voltage inspection
Activation port of inverter module A
ON/OFF signal input port for system low pressure
inspection
ON/OFF signal input port for system high pressure
inspection
Reserved
Reserved
Reserved
Control port of DC fan A
Control port of DC fan B
Inspection port for outdoor ambient temp. and
condensator coil
Current inspection port of the inverter compressor
A and B
Power supply connected port of the main control panel
6.5 Dial indication sign instructions
S1 definition olny for 45kW:
ENC3 and S12 definition:
ENC1 definition:
ENC2 definition:
ENC4 definition:
Reserve
6.4 Outdoor main control board instructions
Set the number of indoor units
to 0-15
Set the number of indoor units
to 16-31
Set the number of indoor units
to 32-47
Set the number of indoor units
to 48-63
Outdoor unit capacity setting switch
4 ˖12HP(335)/14HP(400)
5 ˖16HP(450)
6 ˖20HP(500)
Outdoor unit net address dial code 0-F valid
represents 0-15
Reserve
S2 definition olny for 45kW:
Reserve
S1 definition olny for 33.5kW40kW:
Starting time is set
about 5 minutes
Starting time is set
about 12 minutes
(Default the
Factory Set)
S2 definitionolny for 33.5kW40kW:
Night time selection
is 6h/10h (Default
the Factory Set)
Night time selection
is 6h/12h
Night time selection
is 8h/10h
Night time selection
is 8h/12h
06$1;0L77 ,QVWDOODWLRQPDQXDO

Table of Contents

Related product manuals