CLIVET MSAT-XEE 10.2 User Manual

M09G60E14-04 MSAT-XEE 8.2-30.2 21
7.13 Alarms log reset
Before resetting an alarm identify and remove its cause.
Repeated resets can cause irreversible damage.
Step Display Action Keys Menu/Variable Notes
1 Main menu Press
PAr
2 PAr Select
FnC
3 FnC Press
dEF
4 dEF Select
EUr
5 EUr Press 3 sec.
YES
6 Press
Back to the previous menu
7.14 Setting menu
access to the conguration parameters
Keys Esc + Set → Menu PAr
SETTING menu - PAR (conguration parameters)
Label Acronym meaning (label) Parameters of:
CL Conguration Local Local I/O Conguration
CE Conguration Expansion Expansion I/O Conguration
Cr Conguration Remote terminal Remote terminal I/O Conguration
CF ConFiguration Conguration
Ui User interface User interface
tr thermoregulation Thermoregulation
St Stati (Operating modes) Operating stata
CP ComPressori Compressor
PI Pump (Internal) Primary circuit water pump
FI Fan (Internal) Not used
FE Fan (External) Fans (external) of the disposable exchanger
PE Pump (External) Not used
Hi Electric Heaters (Internal) Not used
HE Electric Heaters (External) Not used
HA Auxiliary Output Not used
br Boiler Not used
dF Defrost Not used
dS dynamic Setpoint Not used
Ad Adaptive Not used
AF AntiFreeze Not used
AS Domestic hot water, Anti-Legionella Not used
HP Heat Pump Not used
PL Power Limitation Not used
tE Time Events Time bands
AL ALarm Alarms
7.15 Scheduling management
It is possible to set 3 dierent schedulings.
To each scheduling is possible to associate 4 events.
To each day of the week is possible to associate a scheduling.
In the example the schedulings have been assigned:
To enable the hour scheduling set the parameters tE00:
Keys Esc + Set → Menu PAr → Menu

CLIVET MSAT-XEE 10.2 Specifications

General

Brand	CLIVET
Model	MSAT-XEE 10.2
Category	Heat Pump
Language	English