Pic 3‐2 Horizontal pole installation
3.5.2 Vertical pole installation
（1）Align the L‐shaped mounting bracket against the screw poles on bottom of reader housing, then install
the rubber and screw the M6 nuts, refer to pic 3‐3:
﴾2﴿ Using two U‐bolts and two toothed installation bracket to fix the reader on vertical rod through the
L‐bracket，refer to pic 3‐‐4.
Note: This installation method is suitable for 50mm ~ 100mm diameter horizontal pole.
Pic 3‐3 L‐shaped mounting bracket installation
To Next Page