III, Installation description
3.1 Precautions
In order to ensure normal and stable operation of the equipment and your personal and property safety,
please carefully read the following notes before installing CL7206B6 reader device：
1. First check whether the outlet is connected to the ground, and check if the local power supply voltage meet
reader voltage requirements;
2. Check if the device is connected tightly and the metal house of the device is connected with ground;
3. Pay attention to the network cable and serial cable type selection and length restrictions;
Serial port cable length 5m maximum.
RS485 length 80m maximum.
4. When installing multiple readers, pay attention to reader antenna display way & the minimum distance
between the antennas, avoid the situation that interference may affect the reader's performance;
3.2 , Installation conditions
Before installing the reader, please carefully check and confirm the product is intact, the accessories are
complete, if there are any damages or shortage, please contact your supplier.
3.3 Device connection
3.3.1 Connect the power adapter
Connect power adapter to AC power socket, and tighten the other end to reader’s power port.
After the circuit is connected, wait for about 1 second, reader makes two alarming sound and enter into
initialization state, after initialization is finished, reader enter into standby mode.
3.3.2 Connecting a PC
To Next Page
Loading...