Cloudray CR Series User Manual

Cloudray Laser System
Cloudray (Jiangsu) Co., Ltd.
16
5. Setup and installation
Temperature and humidity
Ambientes conditions
Operating temperature:
+15 °C to +25 °C (59 °F to 77 °F)
Relative humidity:
45% to 65%, non-condensing
Environmental conditions
⚫ Provide sufficient illumination at the workplace.
⚫ Ensure a dust-free environment (II° according to IEC60947-1).
⚫ Shielding from EMC.
⚫ Freedom of interfering electrical installations, hoses and pipe lines.
⚫ Power supply free of fluctuations.
Before Installation
⚫ Take out the sponge around the laser tube.
⚫ Remove the nylon cable ties around the honeycomb plate or blade.
⚫ When you have the machine in its final position, please be sure to re-fix the feet in all
four corners.
Connections
5.3.1. Mains connection
⚫ Connect the end of the mains connection cable to the main connection socket.
Caution!
Install the connections exactly in the order described, otherwise
electrostatic charging can damage your computer and/or the electronics
of the laser system

Cloudray CR Series Specifications

General

Brand	Cloudray
Model	CR Series
Category	Engraver
Language	English