Cloudray CR Series User Manual

Cloudray Laser System
Cloudray (Jiangsu) Co., Ltd.
2
Liability and warranty
Warranty periods specified in the manufacturers "warranty terms and conditions" shall be
binding for the buyer. If no warranty periods are specified, the general terms and conditions
of sale, delivery and payment apply.
All information, illustrations, tables, specifications and diagrams contained in this operating
manual have been carefully compiled according to the current state of technology. No liability
is accepted with regard to errors, missing information and any resulting damage or
consequential loss.
Strict compliance with the safety procedures described in this operating manual and extreme
caution when using the equipment are essential for avoiding and reducing the possibility of
personal injury or
damage to the equipment. The manufacturer shall not be liable for any damage and or faults
resulting from nonobservance of instructions in this manual.
Nonobservance of the operation, maintenance and service instructions described within this
manual absolves Cloudray (Jiangsu) Co., Ltd. from any liability in case of a defect.
Tip: Gives the user the information needed to achieve the objective
directly and without problems.
Protective eyewear should be worn by anyone around this machine
during operation.
This product contains electrical components that should not be disposed
of with regular garbage.
Caution!
Laser beam - means that the laser machine may operate in laser class
4 when commissioning the laser head. Warns of damage to eyes or
skin caused by direct or scattered radiation.
Important: Information the user must observe or know to avoid process
disruptions or malfunctions when using the product.

Cloudray CR Series Specifications

General

Brand	Cloudray
Model	CR Series
Category	Engraver
Language	English