CMA Dishmachines CMA-L-1X

Other manuals for CMA Dishmachines CMA-L-1X

Parts Manual16 pages

Specifications2 pages

Quick Setup Instructions1 page

Questions and Answers

J
jsharpJul 30, 2025
What to do if the pump motor is inoperative in my CMA Dishmachines Dishwasher?
- O
  ohollowayJul 30, 2025
  If the pump motor in your CMA Dishmachines Dishwasher isn't working, here are a few things to check: * Ensure the door is fully closed. * Make sure the control drawer is properly secured. * The reed (door) switch might be defective; consider replacing it with P/N: 00557.55. * A defective timer assembly (Cam 7) could be the cause; replace the timer assembly with P/N: 00408.80. * The pump motor contactor or the pump motor itself may be defective, in which case you should replace the contactor with P/N: 00404.82 or the pump motor with P/N: 00201.00.
J
James HartAug 6, 2025
How to troubleshoot an inoperative CMA Dishmachines CMA-L-1X Dishwasher?
- A
  Andrew FloresAug 6, 2025
  If your CMA Dishmachines Dishwasher machine is inoperative, try the following: * Check the circuit breaker and reset it if it has tripped. * If the circuit breaker is fine, the power switch might be defective and require replacement with part P/N: 00433.10. * Alternatively, the timer assembly motor could be defective; replace it with P/N: 00501.00.
S
Stephanie FuentesAug 11, 2025
Why does the optional sustainer heater never turn off in my CMA Dishmachines CMA-L-1X?
- W
  wmillerAug 11, 2025
  If the optional sustainer heater in your CMA Dishmachines Dishwasher never turns off, the issue might be due to: * A defective thermostat on the heater. Replace the heater with P/N: 04109.10. * A defective timer assembly (Cam 8). Replace the timer assembly with P/N: 00408.80. * A defective heater relay. Replace the heater relay with P/N: 00631.00.
S
Stephen GriffinAug 17, 2025
Why is there no heat from the optional sustainer heater in my CMA Dishmachines CMA-L-1X?
- J
  Jacqueline BlackAug 18, 2025
  If the optional sustainer heater in your CMA Dishmachines Dishwasher isn't producing heat, here are several potential causes: * A defective thermostat on the heater: Replace the heater with P/N: 04109.10. * A defective heater relay: Replace the heater relay with P/N: 00631.00. * A defective timer assembly (Cam 8): Replace the timer assembly with P/N: 00408.80. * A defective heater: Replace the heater with P/N: 04109.10. * A defective float switch: Replace the float switch with P/N: 13463.00. * The float switch may not be actuated: Ensure the wash tank is completely filled. * Also, ensure the machine is level.
J
joseph14Aug 23, 2025
What causes the pump motor to run with the door open on my CMA Dishmachines CMA-L-1X?
- T
  Tonya LyonsAug 23, 2025
  If the pump motor in your CMA Dishmachines Dishwasher runs when the door is open, the issue could be: * A defective reed (door) switch: consider replacing it with P/N: 00557.55. * A defective pump motor contactor: replace the contactor with P/N: 00404.82. * The delime switch is on: Turn off the delime switch.