CMC Airmaster Q1 User Manual

CMC NV – Airmaster Q1 Installation Guide – V1.0 – MANY1032A.EN
Page 15
This input is only to be connected to a Current Transformer (CT) supplied by CMC. The selection of CT is done in accordance
with the installation and is as such not covered by this manual. Assure the maximum C.T. rating is 20 mA. Do not connect a
C.T. with a rating greater than 20 mA to this CT input.
For the installation, take into account the safety precautions that apply to Current Transformers.
Connector reference: X10
Section 4.9 3-Phase Current sensor
This input is only to be connected to Current Transformers (CT) supplied by CMC. The selection of CT(s) is done in accordance
with the installation and is as such not covered by this manual.. Assure the maximum CTs rating is 100 mA. Do not connect a
C.T. with a rating greater than 100 mA to this CT input.
For the installation, take into account the safety precautions that apply to Current Transformers.
Connector reference: X11

CMC Airmaster Q1 Specifications

General

Brand	CMC
Model	Airmaster Q1
Category	Controller
Language	English