CMi 468446 User Manual

41
After each use
Every 25 hours of operation
All 100 operating hours or once in year
Cleaning the device
Clean unit immediately after every use. Dried
grass remains are very hard, and are very dif-
ficult to remove.
– Remove grass remains with a brush, and
a plastic scraper if required (do not use
sharp implements).
– Remove deposits on the wheels.
– Wipe the tool with a damp cloth.
– Never clean the unit with water or high-
pressure jet.
Changing the blades
►P.7, item11
Removing
– Release the screw(24).
– Remove the blade(23) carefully.
Installing
– Carefully attach the blade(23).
– Attach the washer(26).
– Tighten the blade using screw(24).
Cleaning the air filter
►P.3, item2
– Stop the motor and remove the spark
plug connector.
– Remove air filter cover (15).
– Remove the air filter.
– Wash the air filter in warm water(with a
small amount of detergent).
– Rinse the air filter through with clean
water.
– Leave the air filter to dry out completely.
– Insert the new or cleaned air filter.
– Mount air filter cover (15) again.
Checking the level of motor oil
►P.7, item12
– Unscrew the motor oil filling screw(12)
and remove.
– Read off the oil level on the scale on the
underside of the motor oil filling screw.
– The oil stand must be placed between[A]
and[B].
Cleaning/replacing spark plugs
►P.3, item2
– Remove spark plug connector(13).
– Unscrew the spark plug.
– Check the electrode for discoloration.
Standard colour: Light brown
– Check electrode spacing. Correct spac-
ing: 0.7–0.8 mm
Cleaning the spark plug
What? How?
Cleaning the de-
vice
►Cleaning the device–
p.41.
What? How?
Cleaning the spark
plug
►Cleaning the spark
plug– p.41,
Cleaning the air fil-
ter
►Cleaning the air fil-
ter– p.41
What? How?
Replacing the
spark plug
►Replacing the spark
plug– p.42,
Replacement spark
plugs: ►Technical da-
ta– p.43.
DANGER! Risk of injury! Never
touch the blade on the cutting edge.
Wear gloves at all times when work-
ing with the blade.
NOTICE! Risk of damage to the
device! Ensure the correct installa-
tion direction: the pegs(25) must line
up with the holes in the blade.
NOTICE! Risk of damage to the
device! The device should never be
operated without an air filter, as this
may cause damage to the engine.
If the air filter is damaged or heavily
soiled, it must be replaced.
NOTICE! Risk of damage to the
device! Never brush off a soiled air
filter. Brushing will drive the dirt into
the fibres of the air filter.
WARNING! Danger of injury from
high voltage! Do not touch the spark
plug connector or the spark plug
while the motor is running.
NOTICE! Risk of damage to the
device! Only use wire brushes with
brass bristles to clean the spark plug.
Any other bristle type will damage
the electrode!
GB
Rasenmaeher_Benzin_468446.book Seite 41 Dienstag, 12. April 2016 9:49 09

CMi 468446 Specifications

General

Brand	CMi
Model	468446
Category	Lawn Mower
Language	English