AN241
Overview
This Document introduces how to operate the CMT2310A-EB evaluation board (factory default firmware). The
CMT2310A-EB (factory default firmware) and CMT2310A-EM help users quickly evaluate the performance of
the CMT2310A. Meanwhile, CMT2310A-EB can help users to debug, verify and test the CMT2310A functions,
basing on the hardware as a general CM0 level single chip development board.
Part number covered in this document is shown as follow.
Table 1. Part number covered in this document
Part Number Freq. Demodulation Function Configuration Package
CMT2310A 113 – 960 MHz (G)FSK
High performance RF
transciever
Register QFN24
Reading guideline：
1. Before reading this document, it is advised to read the CMT2310A Data manual first to understand the
functions and performance of the CMT2310A.
2. When using the evaluation board, please refer to the following related AN for further understand the
CMT2310A function configuration options:
a) AN235 CMT2310A FIFO and Packet Format Useage Guide
；
b) AN236 CMT2310A Register Description
；
c) AN237 CMT2310A Quick Start Guide
；
d) AN238 CMT2310A RF Parameter Configuration Guide
；
e) AN239 CMT2310A Auto-transceiver Usage Guide
CMT2310A-EB Evaluation Board Operation Guide
To Next Page
Need help?
General