CMX DMS 7640 - Programming for Regular AUDIO-CD Discs; Programming for MP3-CD Discs

CD player
Version 1 cmx® DMS 7640 Seite 21 von 31
Always press the “STOP” key before starting the
programming.
7.7.1. Programming for regular AUDIO-CD discs
Press the “PROGRAM” key once, the display will show the
memory symbol to indicate that the set is now in “memory
programming mode”.
Press the “NEXT” or “BACK” key to select the track (song)
number you wish to be stored in the first memory (program)
position and press the “PROGRAM” key to confirm your
selection.
Repeat the previous 2 Steps, each time selecting any track
number of your choice to be stored in the successive
(program) positions.
After a maximum of 64 songs (or less) have been selected
as described above, press “PROGRAM” key the display will
now show memory to indicate you have saved a program-
memory.
Press “PLAY” key, the CD player will playback the “saved
sequence” in the program memory.
To clear (cancel) the entire program which is stored in the
memory, simply press “STOP” key.
7.7.2. Programming for MP3-CD discs
Press “NEXT” or “BACK” key to select the album number
which contains the song you wish.
Press “PROGRAM” key (on remote control) to confirm.
Press “NEXT” or “BACK” key to select the track (song)
number you wish to be stored in the current (program)
position.