CMX DMS 7640 - 9 Digital Clock Function

Digital clock function
Version 1 cmx® DMS 7640 Seite 25 von 31
9. Digital clock function
The set has a built-in digital clock, which is displayed when the unit
is in “standby mode” or when you press & hold “PROGRAM” key for
two seconds during CD or radio operation. To set the correct time,
follow the procedure:
Switch unit to “standby mode”
(Display light = off)
Ð
Press & hold “PROGRAM” key for 3 seconds
Display flash shows 12 or 24 hours flashing
Ð
Press “NEXT” or “BACK” key to select 12-hour or 24-hour clock
display system & press “PROGRAM” to confirm you selection
Ð
Press “NEXT” or “BACK” key repeatedly to set the correct hour in
the display and press “PROGRAM” key to confirm.
Ð
Press “NEXT” or “BACK” key repeatedly to set the correct minute in
the display and press “PROGRAM” key to confirm.
Ð
Correct time is now set and will be shown in the display!