CD player
Version 1 cmx® DMS 7640 Seite 22 von 31
Press the “PROGRAM” key to confirm.
Repeat the last steps each time selecting any track (song)
number of your choice to be stored in successive program
positions.
After a maximum of 64 songs (or less) have been selected
as described, press “PROGRAM” key, the display will now
show memory to indicate you have saved a program-
memory.
Press “PLAY” key, the CD-player will playback the “saved
sequence” in the program memory.
To clear (cancel) the entire program which is stored in the
memory, simply press “STOP” key. This will reset the
memory and clear the program.
7.8. Display mode (ID3 tag)
This unit is capable of displaying the “text information” (ID3 tag) of a
MP3 song on the LC display:
To switch on this function, simply press & hold the “FIND”
key for 3 seconds.
To switch back to normal display mode (to display track
number, etc.), press & hold the “FIND” key again for 3
seconds.
To Next Page
Loading...