Need help?Do you have a question about the CNC 3018 and is the answer not in the manual?
General| Model | CNC 3018 |
|---|---|
| Work Area | 300 x 180 x 45mm |
| Connectivity | USB |
| Category | CNC Router |
| Frame Material | Aluminum |
| Spindle Motor | 775 Spindle Motor (12-36V) 24V: 10000r/min |
| Power Supply | 24V 5.6A |
| Software | GRBL |
| Supported OS | Windows |
| Supported Materials | Wood, Plastic, Acrylic, PCB |
Avoid direct eye or skin exposure to radiation from the laser.
Keep the machine away from children during operation.
Always wear protective glasses when operating the laser.
Do not use the machine near flammable objects or gases.
Immediately cut off power in case of an emergency.
Sequence for safely turning off the machine and software.
Comprehensive list and quantities of all parts in the package.
Visual guide detailing the assembly process for the CNC machine.
Setting up the COM port and baud rate for software connection.
Procedure for defining the zero point for engraving operations in Candle.
Detailed guide on starting and managing the engraving process.
Steps to set the engraving starting point (origin) accurately.
To Next Page
