CNC 3018-PRO - User Manual

Describes the initial assembly of the machine's base components.

Details the process of installing the machine's table structure.

Describes attaching the base and Bakelite-C components to the frame.

Explains how to assemble the X and Z axes of the CNC machine.

Covers the specific installation of the Bakelite-D component.

Details the process of installing the spindle motor assembly.

Guides on how to properly install the machine's control board.

Illustrates the electrical wiring connections for the CNC machine.

Instructions for installing the CH340SER driver for Grblcontrol.

Guide to identify the machine's COM port using Device Manager.

Steps to launch and configure the GrblControl software for operation.

Explains how to set up tools and zero axes in Grblcontrol software.

Instructions for installing the Lasergrbl software and its prerequisite driver.

Guide to power on the laser and adjust its focus for optimal performance.

How to import and process raster images in LaserGRBL for engraving.

Instructions for saving programs for use with an offline controller.

How to connect the offline controller to a computer using a USB cable.

Steps to transfer NC files to the offline controller for execution.

Details connecting the offline controller to the main control board.

How to manually move the spindle to the origin using the offline controller.

An overview of the offline controller's user interface and navigation.

Explains the 'Control' page of the offline controller interface.

Describes the 'File' page for managing and selecting G-code files.

Lists the supported file formats for Grblcontrol software.

Lists the supported file formats for Lasergrbl software.

Troubleshooting steps for connection issues with the control board.

Solutions for when the machine's axes fail to move.

Information on materials suitable for milling with the machine.

Information on materials suitable for laser engraving/cutting.

Guidance on the maximum thickness for laser cutting wood/acrylic.

How to correct reversed engraved images.

Adjusting parameters related to limit switch activation.

Method to view or restore default control board parameters.

Recommendations for software used to create NC files.

Troubleshooting installation issues for drivers and software.

Steps to diagnose and fix laser malfunction.

Solutions for when the laser fails to engrave wood.