To Next Page

To Previous Page

Grblcontrol

、

Install the driver(software->Drive->CH340SER.exe)

Note: You need to exit the anti-virus software before installing the driver

、

Determine your Machine's COM port:

 Windows XP: Right click on "My Computer", select "Properties", select "Device Manager".

 Windows 7: Click "Start" -> Right click "Computer" -> Select "Device Manager" -> "Ports (COM &

LPT)"

 Your machine will be the USB Serial Port (COMX), where the “X” represents the COM number, for

example COM5.

 If there are multiple USB serial ports, right click each one and check the manufacturer, the machine will

be "CH340".

Note: You need a USB cable to connect the control board and the computer to see the port number.

Questions and Answers:

Need help?

Do you have a question about the CNC 3018-PRO and is the answer not in the manual?

CNC 3018-PRO Specifications

General