Need help?Do you have a question about the CNC 3040Z-DQ and is the answer not in the manual?
General| Type | CNC Router |
|---|---|
| Working Area (X) | 300 mm |
| Working Area (Y) | 400 mm |
| Max. Running Speed | 3000mm/min |
| Frame Material | Aluminum |
| Software Compatibility | Mach3, Type3, ArtCAM |
| Driving Units | Ball screw |
| Collet | ER11 |
| Repeat Positioning Accuracy | 0.05mm |
| Operating Voltage | AC110V or AC220V |
| Command Code | G-code |
Specifies the necessary hardware and operating system for the control computer.
Recommends control and design software for operating the engraving machine.
Identifies and labels the main parts of the engraving machine.
Illustrates the connection diagram for the computer, control box, and engraving machine.
Instructions for installing and configuring the necessary control software.
Details on setting up parameters within the control software for optimal operation.
Step-by-step guide for performing a manual test and trial run of the engraving machine.
Explains the coordinate system (X, Y, Z axes) for controlling the machine's movement.
Demonstrates basic engraving techniques using graphics and text as examples.
Explains how to install an auxiliary platform for enhanced engraving accuracy and protection.
Details a practical example of engraving using a double-color plate on the auxiliary platform.
Explains the use of a tool setting gauge for accurate Z-axis positioning.
To Next Page
