3020Z/3040Z-DQ CNC Engraving Machine
CONTENTS
■Read before using----------------------------------------------------------------1
■To know your engraving machine------------------------------------------4
·Composition name of the machine
·Sketch map of installation and wiring
■To test your engraving machine--------------------------------------------5
·(Mach3) Software settings
·Trial run and manual control test for the machine
·Definition of triaxial coordinate
■To use your engraving machine--------------------------------------------10
·Primary engraving practice
·Install auxiliary operating platform for your engraving machine
·Secondary engraving practice
·Application of tool setting gauge
·Control the spindle motor through software
·Notice for machine maintenance and repair
3
To Next Page
Loading...
