9. Transportation and storage
Product storage and transportation process can not be
affected by rain and snow, and extrusion, should be
placed in the air circulation, relative humidity (25℃±5℃)
does not exceed 90%. The lower temperature is -25℃ ,
and the upper temperature is +55℃.
10. Unpack and check
Open the carton and check the instruction manual inside
the carton.
11. Ordering instructions
JD-5B has one more fault alarm buzzer than JD-5, other
performance is exactly the same, the current of JD-5/JD-
5B is 2-100A; JD-6 current is 60-250A,160-400A; Please
note that the motor power is consistent with the
protector. When ordering, please indicate the model and
specification of the product. For special requirements,
please consult with the manufacturer.
12. Company commitment
Under the premise that the user complies with the
conditions of use and storage and the seal of the
product is in good condition, the company shall repair or
replace the product free of charge if the product is
d a m a g ed or c a n no t b e us e d no r m a l ly du e to
manufacturing quality problems within 24 months from
the production date. If the warranty period is exceeded,
it shall be repaired with compensation. However, if the
damage is caused by the following circumstances, it shall
be repaired with compensation even within the warranty
period:
(1) Improper use, maintenance or storage;
(2) self-refitting or improper repair;
(3) damage occurs after purchase due to falling or during
installation;
(4) Force majeure such as earthquake, fire, lightning
strike, abnormal voltage and secondary disasters;
(5) The electrical life of the product exceeds 100,000
times; Mechanical life more than 1 million times;
10
To Next Page
Loading...
