CNC JD Series - Page 2

JD Series Motor Integrated Protector Instructions
1.General
2.Type designation
Rated control power voltage
Rated current code
Design sequence No
Motor Integrated Protector
JD-□/□□
JD series motor integrated protector, suitable for
power supply circuit with AC 50/60Hz, voltage
380V and below.JD series and AC contactor and
other switching circuit to form motor control circuit.
When the main circuit of the motor is out of phase,
overload and other abnormal working state, the
switch contact can be disconnected in time, the
three-phase power supply of the motor is cut off,
and the motor can be protected reliably.
Standard: IEC 60947-4-1.
1