EasyManua.ls Logo

CNC UC400ETH User Manual

CNC UC400ETH
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Stefan Gemeinert,Frühlingstrasse 8 85253 Erdweg
Tel: 081386695536 www.cnc-technics.de
Breakoutboard für
UC400ETH
Operation Manual
All rights to these operating instructions remain with cnc-technics. Texts, information and
illustrations of these operating instructions may not be reproduced, distributed or used for
purposes of competition without authorization or communicated to others.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the CNC UC400ETH and is the answer not in the manual?

CNC UC400ETH Specifications

General IconGeneral
InterfaceEthernet
Number of Axes4
CommunicationEthernet
Operating Temperature0°C to 50°C
Humidity5-95% RH, non-condensing

Summary

Introduction

Delivery Parts

Lists the items included in the delivery package.

Description of the Breakout Board

Commissioning

Installation of the UC400ETH

Details the physical mounting and connection of the UC400ETH unit.

Inputs

Outputs

Set Axes in Mach3/UCCNC

Driver Connection

Set Spindle

Spindle Direction

Spindle in UCCNC

Relay Outputs

Status Display

Charge Pump Configuration