6.2.6 WPS Setting
Wi-Fi Protected Setup, it can simplify the procedures of wireless encryption between CQR-981 and
other Wireless Router or Access Point. If your Wireless Router or Access Point also supports WPS
function, users can activate WPS auto-encryption to speed up the procedures.
WPS supports 2 models: PIN (Personal Information Number) and PBC (Push Button Configuration).
These models are approved by the Wi-Fi Alliance.
PIN model, in which a PIN has to be taken either from a sticker label or from the web interface of the
WPS device. This PIN will then be entered in the AP or client WPS device to connect.
PBC model, in which the user simply has to push a button, either an actual or a virtual one, on both
WPS devices to connect.
*The following figure is the display of the front of CQR-981.
To Next Page
Loading...
