2
ENGLISH
10″ Band Saw
Art.no 18-3205 Model JFB10-UK
40-7894 JFB10
Please read theentire instruction manual before use and save it for future reference. We reserve theright for any
errors in text or images and for making any necessary technical changes to this document. If you should have
any questions concerning technical problems please contact our Customer Services.
1. Safety
Warning!
In order to minimise therisk of fire, electric shock or personal injury, certain basic safety precautions must always
be observed when using this machine. Read this instruction manual carefully before using theproduct and save
this manual for future reference.
1. Keep theworking area tidy. Cluttered surfaces and benches invite accidents.
2. Take stock of your working environment. Do not expose thetool to rain. Do not use thetool in moist or wet
areas. Keep theworking area well lit. Never operate thetool near flammable liquid or gas.
3. Avoid electric shocks. Avoid body contact with earthed objects such as pipes, radiators, ovens or refrigerators.
4. Keep other people at asafe distance. Do not allow anyone, especially children, not involved in thework process
to touch thetool or its electric cable. Keep all bystanders at adistance.
5. Store thetool in asafe place. When your tools are not in use, keep them in alocked, dry area, away from children.
6. Do not force thetool. The tool will work better and safer at thefeed rate for which it was intended.
7. Use thecorrect machine. Do not try to use small tools to perform jobs requiring more powerful tools. Do not
use atool for apurpose for which it was not designed, e.g. using acircular saw for lopping branches off trees.
8. Wear suitable attire. Do not wear loose-fitting clothing or jewellery; they could be caught in moving parts.
Non-slip shoes are recommended for outdoor work. Wear ahairnet or similar if you have long hair.
9. Always use safetywear. Wear safety glasses. Use adust mask or dust filter when working in dusty environments.
10. Use dust extractors. If thetool is equipped with or connected to adust extractor/collector, make sure that
itis turned on and used correctly.
11. Do not abuse thelead. Do not jerk thelead, grip theplug itself when disconnecting thepower. Make sure
that themains lead does not come into contact with heat, oil, or sharp edges.
12. Firmly secure theworkpiece. If possible use vices or clamps to hold theworkpiece in place. This is much
safer than holding theworkpiece in one hand.
13. Do not overreach. Make sure that you stand steady and balanced all times.
14. Look after you tools. Make sure that they are clean and that theedges are sharp for maximum effect and
best results. Follow themanual’s recommendations regarding lubrication and replacement of accessories.
Inspect themains lead regularly. If it is damaged it should be replaced by aqualified service technician.
Inspect all leads and cables regularly to check for any damage. Make sure that themachine’s handles and
controls are clean, dry and free from oil and grease.
15. Have any defective power switches replaced at aqualified service centre.
16. Do not use theproduct if theON/OFF switch does not function properly.
17. Turn thepower off. Pull out theplug and push in theemergency stop button before servicing or changing
any blades, drill bits, cutters or sanding discs.
18. Remove all spanners and repair tools. Make ahabit of checking to make sure that themachine is free of all
spanners and tools before turning thepower on.
19. Avoid accidental starts. Do not walk around with your finger on thetrigger of apower tool if it is plugged in.
Make sure that theON/OFF switch is set to OFF before plugging in any power tool.
To Next Page
Loading...
Need help?
General
