CO/Tech J1x-JF2-210 User Manual

Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen och spara den för
framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Kap & Geringssåg
Kapp- & Gjæresag
Katkaisu- ja jiirisaha
Art.no. Model
18-3027 J1x-JF2-210/20-UK
30-9012 J1x-JF2-210/20
ENGLISHSUOMI
Compound
Mitre Saw
Ver. 200810

CO/Tech J1x-JF2-210 Specifications

General

Brand	CO/Tech
Model	J1x-JF2-210
Category	Saw
Language	English

Summary

General Safety Rules

Protective Eyewear Use

Always wear safety glasses or a visor to protect eyes from flying debris.

Special Safety Rules for Compound Mitre Saw

Use Correct Cutting Blades

Employ specified blades with negative teeth; replace damaged blades promptly.

Assembly and Blade Check

Freehand Sawing Prohibition

Check for Blade Damage

Inspect the saw blade for cracks or damage before each use and replace if necessary.

Product Safety Symbols

Ear Plug Warning Symbol

Indicates risk of hearing loss; use ear plugs when operating the machine.

Protective Eyeglasses Symbol

Signifies the need for eye protection against flying debris.

Keep Hands Away Symbol

Cautionary symbol to maintain awareness and keep hands clear of the rotating saw blade.

Technical Data

Motor and Blade Specifications

Cutting Operations

Cutting at 0 Degrees

Angled Cutting

0° to 45° Blade Angle Cuts

Mitre Sawing Angles

Setting Mitre Angles (-45°/0°/+45°)

Replacing the Saw Blade

Blade Replacement Preparation

Unplug power, release saw head and blade guard before starting blade replacement.

Blade Bolt and Flange Removal

Use spindle lock and key to loosen and remove the blade bolt and outer flange.

Installing New Blade

Install new blade, ensuring correct rotation and clean flanges.

Post-Replacement Checks

Carbon Brush Maintenance

Inspect Carbon Brush Length

Replace Damaged Carbon Brushes

Motor Fault Diagnosis

Troubleshooting Motor Start Issues