CO/Tech J1x-JF2-210 User Manual

12
ENGLISH
Technical data
Motor    230VAC,50Hz
Outputpower:   1800W
No-loadspeed:   4800rpm
TCT sawblade  Ø210xØ30x2.6mm
Numberofteeth:   30
Adjustablebladetilt:  0°-45°totheleft
Adjustablemitresawing:  -45°/0°/+45°
Table    420x160mm
Maxlumberdimensionat90° 200x60mm
Maxlumberdimensionat45° 140x60mm
Maxlumberdimensionat2x45° 140x37mm(doublemitrecut)
The package contains
• Clamp
• Key
• Dustbag
• Supports(2x)
• Operationsmanual
Measures to take before putting the machine to use
• Themachinemustbemountedrmlyonaworkbenchorstand,orsimilar.
• Allcoversandsafetydevicesmustbecorrectlyinstalledbeforestarting

themachine.
• Thesawblademustbepermittedtorunfreelyinallsettings.
• Whenworkingwithpre-usedwood,youmustbeattentiveofandlookfor
foreignobjectsintheworkpiecesuchasnailsandscrews.
• Beforestartingthemachine,verifythatthebladeiscorrectlyinstalledandthat
allmoveablepartsoperatefreely.
• Beforeconnectingthemachinetoanelectricsocket,youshouldmakesure
thatitismadeforthesamevoltageasyouhaveinthesocket.

CO/Tech J1x-JF2-210 Specifications

General

Brand	CO/Tech
Model	J1x-JF2-210
Category	Saw
Language	English