To Next PageTo Next PageWhat to do if my CO/Tech Power Tool is running slowly?
If your CO/Tech Power Tool is running slowly, it could be due to several reasons. The tool might be dull or damaged, in which case you should sharpen or replace it. Alternatively, the speed may be set too low; try increasing the speed using the wheel. Another possibility is that the motor is overheated. To prevent this, avoid feeding material too quickly.
Why my CO/Tech Power Tool does not run?
If your CO/Tech Power Tool isn't running, the problem might be due to a lack of power. Check that the wall socket is functioning correctly. Another potential cause could be worn carbon brushes. If you suspect a motor or electrical issue, contact us.
What to do if my CO/Tech M1Q-65D-UK Power Tool has strong vibrations?
If your CO/Tech Power Tool has strong vibrations, the blade might be loose. You should tighten the blade and ensure it is correctly assembled.
What to do if my CO/Tech M1Q-65D-UK motor has sparks?
If you notice sparks in the motor of your CO/Tech Power Tool, it might be due to caught carbon brushes. In this case, contact us.
Why my CO/Tech Power Tool makes unusual sounds?
If your CO/Tech Power Tool is making unusual sounds, it might indicate a mechanical problem. In this case, contact us.
Guidelines for maintaining a clean, well-lit, and safe work environment, avoiding distractions and hazards.
Precautions for safe use of electrical tools, including proper grounding, avoiding wet conditions, and lead safety.
Advice on staying alert, using protective equipment, avoiding unexpected starts, and proper attire for safe operation.
Instructions on correct tool usage, handling faults, unplugging before adjustments, and secure storage away from children.
Explanation of safety symbols used on product labels, including manual reading and protective equipment usage.
Key technical data of the jig saw, including voltage, power, speed, sawing depth, sound levels, and vibration rate.
Detailed breakdown of jig saw components with numbered references for identification and understanding.
List of included or compatible accessories for the jig saw, such as Allen key and saw blades.
Step-by-step guide for safely replacing the saw blade using the Allen head screws.
Instructions on how to adjust the footplate angle for bevel cuts using Allen head screws.
Guide for using the parallel stop for precise measurements and cuts, including adjustment and tightening.
Instructions on how to start, stop, and lock the power switch for safe and continuous operation.
Method for adjusting the variable speed setting using the control wheel for different materials.
How to adapt the saw for different materials by adjusting the pendulum movement for optimal cutting.
Common issues with the machine, their possible causes, and recommended measures for resolution.
Essential tips for keeping the machine clean, maintaining ventilation, and avoiding harmful cleaning agents.
Guidance on responsible disposal of the product according to local ordinances and municipal regulations.
General| Category | Power Tool |
|---|---|
| Model | M1Q-65D-UK |
| Voltage | 18V |
| Battery Type | Lithium-Ion |
| Chuck Size | 13mm |
| Max Torque | 65 Nm |
| Weight | 1.8 kg |
