9
ENGLISH
Care and maintenance
• Always keep the ventilation opening free of sawdust and debris.
• Clean the machines regularly with dishwashing detergent and a soft cloth.
• Do not use dissolvents.
Disposal
Follow local ordinances when disposing of this product. If you are
unsure about how to dispose of this product contact your municipality.
Troubleshooting
The following table contains information that may be of help when troubleshooting.
Symptom Possible cause Measure
The machine does
not run.
No power. Check that the
wall socket is
functioning.
Worn carbon brushes. Contact us if you
have a motor or
electrical problem.
Short circuit.
Defective power switch.
The machine runs
slowly.
Dull or damaged tool. Sharpen or
replace.
Speed to low. Increase the speed
with the wheel.
The motor is overheated. Do not feed too fast.
Unusual sounds.
Mechanical problem. Contact us.
A partial short in the winding.
Strong vibrations. The blade is loose. Tighten the blade
and make sure that
it is correctly
assembled.
Sparks in the motor. Carbon brushes are caught. Contact us.
A short in the winding.
The commutator is dirty.
To Next Page
Loading...