EasyManuals Logo

CO/Tech MDDG-20DEN3-QA3-UK User Manual

CO/Tech MDDG-20DEN3-QA3-UK
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
9
ENGLISH
Emptying the water reservoir
1. Unplug themains lead from thewall
socket.
2. Grip thewater reservoir by thehandles
(one on each side) and pull it forwards.
3. Empty thewater out of water reservoir
and then refit it onto thedehumidifier.
The dehumidifier will restart
automatically once thewater reservoir
has been refitted if it was shut off
automatically.
Automatic defrost feature
• The dehumidifier is equipped with anautomatic defrost feature. Frost can build up
on some components inside thedehumidifier under certain conditions. The defrost
feature removes this frost.
• The dehumidifier’s compressor will shut off when thedefrost feature is activated
and thefan continues to run until thefrost has disappeared.
• A purling sound might be heard from thedehumidifier during defrosting, this is normal.
• No settings can or need to be made for this feature.
Air filter
Disassembly
1. Remove thegrille and air filter from
theback of thedehumidifier.
2. Remove thefilter from thegrille.
Cleaning
1. Wash thefilter carefully in warm water, use amild detergent if necessary.
Note: Do not wash theair filter in adishwasher.
2. Rinse thefilter in clean water and let it dry before reinserting it.
Assembly
Fit theair filter back onto thegrille and then fit thegrille onto thedehumidifier.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CO/Tech MDDG-20DEN3-QA3-UK and is the answer not in the manual?

CO/Tech MDDG-20DEN3-QA3-UK Specifications

General IconGeneral
BrandCO/Tech
ModelMDDG-20DEN3-QA3-UK
CategoryDehumidifier
LanguageEnglish

Related product manuals