To Next PageTo Next Page
Need help?Do you have a question about the CO/Tech PN3800II and is the answer not in the manual?
Explains the meaning of various warning symbols found on the chain saw for safe operation.
Step-by-step instructions for attaching the guide bar and saw chain to the saw body.
Information on the correct type of fuel and mixing instructions for the chain saw.
Guidance on using the appropriate chain oil for lubrication and maintenance.
Detailed steps for accurately mixing petrol and two-stroke oil for the chain saw.
Instructions on how to safely refuel the chain saw with the correct fuel mixture.
Step-by-step guide on safely starting the chain saw engine.
Procedure to verify that the chain and guide bar are receiving sufficient lubrication.
Instructions for adjusting the carburetor for optimal engine performance.
Procedure to test the functionality of the chain brake before operation.
Instructions on how to properly shut down the chain saw engine.
Explanation of kickback phenomenon and methods to prevent it.
Describes the initial cuts to steer the tree during the felling process.
Explains how to make the final cut to safely fell the tree.
Instructions on safely removing branches from a fallen tree.
Methods for cutting fallen trunks based on their support configurations.
Safe practices and positioning when using a saw horse for cutting operations.
Tasks to perform after each use to maintain the chain saw's condition.
Instructions for cleaning and maintaining the air filter.
Procedure to ensure proper chain oil flow to the guide bar.
How to clean and maintain the guide bar.
Additional checks for fuel hoses, screws, nuts, and handles.
How to clean the engine's cooling fins to prevent overheating.
Instructions for cleaning or replacing the fuel filter.
How to clean the oil filter for the chain lubrication system.
How to clean and adjust the spark plug for optimal ignition.
How to check the sprocket for wear and when to replace it.
Guidelines on when and how to sharpen the saw chain for effective use.
Step-by-step instructions for filing the saw chain teeth correctly.
Common starting issues and their corresponding solutions.
Troubleshooting steps for low power or poor engine idle.
Diagnosing and fixing issues related to chain oil lubrication.
Technical details about the engine, including volume and power.
Specifications for the guide bar and saw chain.
Details about the saw chain type, pitch, and track width.
Information on sound emission levels and vibration data.
General