EasyManua.ls Logo

Coats 6401 - Specifications; Standard Accessories; Optional Accessories; Features

Coats 6401
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 • COATS 6401 Truck Wheel Balancer
Direct Drive
Specifications
• Cycle time . . . . . . . . . . . . . . . . .12 seconds (avg.)
• Max Tire Diameter . . . . . . . . . . . . . . . . .46 inches
• Max Tire Weight . . . . . . . . . . . . . . . . .200 pounds
• Rim Diameter . . . . . . . . . . . . . . . . . . . .16 inches
• Wheel Width Range . . . . . . . . . .4.5 to 25 inches
• Balancing Increments:
Truck Truck RV Car
Round Off Dynamic Static Dynamic Dynamic
Ounce 2.0 2.0 wt≤4.0; .5 .25
wt>4.0; 1.0 .5
Grams 50 50 wt≤100; 10 wt>55; 10
wt>100; 20 wt≤55; 5
• Resolution (Round Off Mode) . . .0.01 ounce, 1.4º
• Motor - Modified torque with 850 RPM rating,
forced air cooling, large housing for heat dissipa-
tion, and heavy duty insulation for high tempera-
ture applications
• Balancer Weight . . . . . . . . . . . . . . . . .900 pounds
• Shipping Weight . . . . . . . . . . . . . . .1,100 pounds
Standard Accessories
• 5/16 Allen Wrench
• Weight Hammer
• 6401 Threaded Stud
• Accessory Pegs
• Hood Springs
• Caliper
• Small Cone
• Medium Cone
• Large Cone
• Truck Cone
• Truck Cone Spacer
• Back Cone Spring
• Pressure Drum
• Hubnut Wrench, Large
• Hubnut Wrench, Small
• Hubnut
Optional Accessories
• Tire/Wheel Lift #0501: A roll-around hydraulic lift
for mounting tire and wheel assembly to the bal-
ancer
• Dayton Wheel Adapter for 20-22.5 Inches
• Dayton Wheel Adapter for 22-24.5 Inches
• Combi Adapter for Most Truck Wheels
• Hub
Features
• Exclusive Direct Drive System - No Belts or
Pulleys
• Will Balance Most Automotive, All Truck, RV and
Light Truck Wheels
• Backcone And Truck Cone Mounting Systems
• Single Spin Dynamic Two Plane Balance Or Static
Balance
• Vertical Wheel Mounting
• Hood Safety Interlock System
• Static, Car/RV And Truck Operating Modes
• Adjustable Control Panel
- Scratch and Solvent Resistant
- Large, Bright Digital Displays
- Easy-to-Read Position Indicators
- Large Keypad for Data Entry
- Easily Repositioned for Best Visibility
- Electronics Isolated from Motor Heat
- Automatic Memory and Program Check
• Automatic Rim Gauge Return
• Simple Calibration
• Removable Shaft Stud
• Oversized Weight Bins
• Built In Anvil for Hammering Weights
• "No Bolt-Down" Installation

Related product manuals