Important: Always read and follow the operating instructions. • 3
Pressure Safety Valve — The high pressure safety
valve is set to exhaust at line pressures above 185
PSI.
Release Valve — Allows the manual release of air
pressure from tire when clip-on chuck is attached to
tire valve.
Air Inflation Gauge — Registers tire pressure
when clip-on chuck is attached to tire valve stem
and inflation pedal is released.
Swing Arm Adjustment Knob — Adjusts swing
arm/vertical slide assembly for proper horizontal
positioning of mount/demount head.
Lube Bottle — Dispenser for rubber lubricant.
Inflation Pedal — Three-position pedal that allows
inflation of tires through air hose and clip-on chuck.
Oil Check Dipstick — For transmission oil level.
DuckHead
®
(Combination Mount/Demount Head)
— Mounts and demounts tire from wheel.
Duckhead
®
Roller — Attachment for DuckHead to
aid in Mounting tire on the wheel.
Robotic Arm Control Valve — Controls vertical
movement of robotic arm cylinder.
Robo Arm™ — Provides extra leverage for runflat
and low profile tires.
Clamps — Holds wheel to table top for tire chang-
ing. Position outward to allow outside clamping of
wheels.
Bead Sealing Nozzles — Expands tire sidewall to
bead seat area of rim to seal tire to rim and allow
inflation.
Table Top — Rotating chuck for tire changing.
Clamp Control Pedal — Three-position pedal that
opens, holds or closes rim clamps.
Bead Loosener Control Pedal — Controls opera-
tion of bead loosener shoe. Available on model
7050.
Table Top Pedal— Three-position pedal that controls
rotation of table top (forward, off, reverse).
Bead Lifting Tool — Used to lift and position tire
bead correctly on duckhead
®
.
Tire Bumper Guards — Provides protective surface
when bead loosening tires.
Bead Loosener Shoe — Pivoting shoe for loosen-
ing tire beads.
Bead Loosener Handle/Button — Controls opera-
tion of bead loosener shoe. Pull handle up or down
on some models.
Important Safety Decal — Important safety infor-
mation for the operator. DO NOT obstruct with tire
stickers or other materials.
Tower — Support for horizontal and vertical slides,
also air storage tank.
Vertical Slide Locking Handle — Locks and
unlocks vertical slide and sets correct vertical posi-
tion to maintain head/wheel clearance.
To Next Page
Loading...
Need help?
General
