Need help?Do you have a question about the COBHAM SAILOR 1000 XTR Ku 8W and is the answer not in the manual?
General| Frequency Band | Ku-band |
|---|---|
| Stabilization | 3-axis |
| Transmit Power | 8W |
| Power Output | 8W |
| Azimuth Coverage | Unlimited |
| Antenna Type | Ku-band |
| Frequency Range (Tx) | 13.75 - 14.5 GHz |
| Frequency Range (Rx) | 10.7 - 12.75 GHz |
| Antenna Diameter | 1.0 m |
| Power Consumption | 100 W |
| Operating Temperature | -25°C to +55°C |
| Polarization | Linear |
| Storage Temperature | -40°C to +80°C |
| Humidity | Up to 95% non-condensing |
| Compliance | CE, ETSI, FCC |
| Gain (Tx) | 40.2 dBi @ 14.25 GHz |
Information on microwave power radiation and required safety distances from the antenna.
General safety advice for all personnel handling the equipment.
Describes the system's operation, features, and variants (8W/16W).
Details the ADU's construction, modules, and the BDU's role as the central unit.
Lists applicable model numbers and available optional accessories for the system.
Lists necessary tools, site guidelines, and how obstructions affect signal.
Step-by-step guide for physically installing the Above Deck Unit (ADU).
Procedures for installing and grounding the Below Deck Unit (BDU).
Outlines the sequence of events from system startup to operational status.
How to access and navigate the system's web interface for setup.
Steps to set up and activate a VSAT profile, including modem and satellite data.
Configuration of network settings, navigation input, and blocking zones.
How to use the wizard to guide the initial antenna setup after login.
Instructions for updating system software, saving configurations, and performing calibration.
How to access the VSAT modem and perform the antenna line-up.
Guides on troubleshooting common issues, password recovery, and accessing support.
Checklist items for verifying antenna installation, safety, and grounding.
Checklist for verifying BDU installation, grounding, and cable connections.
Steps for performing functional tests to verify system operation.
Comprehensive specifications for the ADU and BDU, including environmental ratings.
Detailed technical specifications for the VSAT LNB and BUC units.
Information for optimizing VSAT modem performance and setup.
How to access and use the command line interface (CLI) for system configuration.
Explains the importance of grounding and RF protection for system safety.
Describes how the system detects and reports events during operation.
Lists the regulatory approvals for the SAILOR 1000 XTR Ku system.
To Next Page