Need help?Do you have a question about the COBHAM SAILOR Global Xpress Modem Unit GMU and is the answer not in the manual?
Overview of the SAILOR XTR Ka system, its capabilities, and use with Inmarsat GX service.
Guidelines for selecting an optimal installation location, considering factors like obstructions and radiation hazards.
Step-by-step instructions for installing the 100 cm SAILOR XTR Ka Above Deck Unit (ADU).
Step-by-step instructions for installing the 60 cm SAILOR XTR Ka Above Deck Unit (ADU).
Instructions for connecting the ADU, BDU, and modem components using specified cables and ports.
Section for defining VSAT profiles, navigation input, blocking zones, and user permissions.
Instructions on how to set up and activate VSAT profiles, including modem and satellite data.
Steps for performing azimuth and cable calibration, crucial for accurate antenna pointing.
A checklist to verify proper installation of the antenna, covering obstructions, safety, and grounding.
Checklist for verifying correct installation and connection of the BDU, modem, and associated wiring.
Steps to perform functional tests in harbor mode to ensure the system is operating correctly.
Provides initial checks and guidelines for troubleshooting common system faults and issues.
Describes the system overview and installation steps for the dual antenna configuration.
Steps for configuring the Master and Slave BDUs for dual antenna operation.
To Next Page
General