EasyManuals Logo

COBHAM SAILOR Global Xpress Modem Unit GMU User Manual

COBHAM SAILOR Global Xpress Modem Unit GMU
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #85 background imageLoading...
Page #85 background image
Service
98-175666-A Chapter 4: Setup of the antenna 4-26
4.3 Service
4.3.1 Software
In this section you can manage software versions, upload and save configurations and reset
the SAILOR XTR Ka to factory default.
Upload
The following items are required before the software can be updated:
One computer with a standard Ethernet port available.
A standard Internet browser.
One straight LAN cable.
The file with the new software.
1. Power up the SAILOR XTR Ka system, i.e. switch on the BDU. Wait until the text
INITIALISING has disappeared from the BDU display.
2. Connect a PC to he front LAN connector of the BDU.
3. Open your Internet browser and enter the IP address of the BDU. The IP address is
http://192.168.0.1 (default).
4. Type in the user name (admin or guest) and password.
Figure 4-23: Service - Software
Note
Only qualified service personnel should make a software
update.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the COBHAM SAILOR Global Xpress Modem Unit GMU and is the answer not in the manual?

COBHAM SAILOR Global Xpress Modem Unit GMU Specifications

General IconGeneral
BrandCOBHAM
ModelSAILOR Global Xpress Modem Unit GMU
CategoryAntenna
LanguageEnglish

Related product manuals