EasyManuals Logo

COBHAM SAILOR Global Xpress Modem Unit GMU User Manual

COBHAM SAILOR Global Xpress Modem Unit GMU
167 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
98-175666-A Appendix F: Event messages F-2
List of events
F.2 List of events
(241121)
ID Module Type Description Explanation
08061-0 ADM WARNING VMU linux shell
password
The specified password (root) for the satellite
modem is not accepted by the modem. (!T,!G,!S)
08062-0 ADM WARNING VMU debug shell
password
The specified password (user) for the satellite
modem is not accepted by the modem. (!T,!G,!S)
08069-0 ADM WARNING Blocking Zone The antenna has entered a blocking zone. (!S)
0806A-0 ADM WARNING VMU connection The ACU has lost connection to the satellite
modem. (!T)
0806C-0 ADM ERROR VMU frequency setup There is a mismatch in the frequency setup.
Probably the satellite modem is not configured
correctly to match the requirements of the ACU
and antenna. A common mismatch is the absence
of Rx or Tx LO parameter in the satellite modem.
(!T)
08073-0 ADM WARNING Slave connection The system is configured as a dual antenna master,
but no dual antenna slave is connected to it. Either
disable the dual antenna master in the web
interface or configure a another system as a dual
antenna slave. (!T,!S)
08074-0 ADM WARNING Master connection The system is configured as a dual antenna slave,
but it was not possible to connect to the dual
antenna master. Check that the IP address entered
in the modem profile is correct and check that the
master and slave systems are physically connected
as described in the manual. (!T,!S)
08075-0 ADM WARNING Rx cable calibration Calibration of the antenna cable failed. The cable
could be defective, too long, connectors not
properly connected, or the BDU or ADU hardware
could be defective.
08076-0 ADM WARNING Dual mode
configuration
The system is configured as a dual antenna system,
but the system setup is invalid. The dual mode
function may not work properly or performance
could be degraded. Info code: xxxxxxx1 = Antenna
types are different, they must be identical
xxxxxxx2 = Master or Slave hardware does not
support dual mode operation. xxxxxxx3 = Software
version on master and slave are different, they must
be identical. (!T,!S)
Table F-1: Event messages

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the COBHAM SAILOR Global Xpress Modem Unit GMU and is the answer not in the manual?

COBHAM SAILOR Global Xpress Modem Unit GMU Specifications

General IconGeneral
BrandCOBHAM
ModelSAILOR Global Xpress Modem Unit GMU
CategoryAntenna
LanguageEnglish

Related product manuals