Configuring the radio
21
SLEEP ON Enable sleep mode (to minimize power
consumption).
Sleeps for periods of 1 second after 15 seconds
of idle mode. Idle mode is: no signal detected
and no operation of the radio.
OFF Disable sleep mode.
CONTRST 1, 2, 3, 4, 5 Contrast.
1 = lowest and 5 = highest.
SHANG OFF Off. Resumes scanning when signal
disappears.
4, 6, 8, 10 Scan hang time (in seconds) on an active
receiving working channel. The time is
measured from signal detected - remains on
channel even if signal disappears.
SCRES OFF Automatic resume deactivated.
3, 6, 10,
15, 20, 25,
30
Scanning/watch can be automatically resumed
after this time (seconds) if previously
terminated with PTT.
WTCH DUAL Single press on the SCN key activates Dual
watch.
TRI Single press on the SCN key activates Triple
watch. If no CALL channel is programmed,
“Dual” watch is activated.
Name Values Description
0845
To Next Page
Loading...
Need help?
General
