Configuring the radio
23
1 2 3 4 5 6 7 8 9 0-9 In ATIS programming mode:
• Select the digit position with the Light/Lock
button.
• Select the digit with or .
• Press Light/Lock to confirm programming.
Note: All digits must be programmed.
PREFA OFF Remove tag “A” for current working channel.
ON Tag current working channel with “A”. If
another channel was previously tagged “A”,
this is overruled.
• The working channel can now be selected
with a long press on .
PREFB OFF Remove tag “B” for current working channel.
ON Tag current working channel with “B”. If
another channel was previously tagged “B”,
this is overruled.
• The working channel can now be selected
with a long press on .
Name Values Description
1211
To Next Page
Loading...
